You are about to change tabs!!!

Menu items here are different on each tab

Only menu items relevant to installers will be shown when in the installers tab.

Do not show again

You are here: Home > Products > Net2 range > PROXIMITY KP series keypads

• OEM components
• Installers
• Welcome

	Use with Switch2 or Net2
	Keypad and proximity reader all in one
	Read range up to 100mm with PROXIMITY cards
	Easy mounting
	Supplied with a choice of black or white bezels
	Low profile - less than 16mm deep
	2 sizes
	IPX7 rated - suitable for external use

About - KP readers are a keypad and a proximity reader all in one. This allows card plus PIN (or code) access control with a single reader. KP readers are for use with Switch2 and Net2 systems. The readers are supplied with a choice of black or white bezels. Additional colours are available to Paxton Access registered installers free of charge.


Installation - The reader is wired as shown on the control unit label. Be sure to avoid mounting on metal surfaces or near other proximity readers as this will affect the read range. The cable exits centrally from the back of the reader making drilling and mounting very accurate.


Operation - A token is read by holding it within close proximity of the reader. Once a token has been read if the reader has been configured for code/PIN this must then be entered using the keypad. The control unit verifies the information and grants or denies access as appropriate. If access is granted the green LED flashes. If access is denied the red LED flashes.

---

Contact us

	01273 811011
	support@paxton.co.uk
	Skype: paxton.support

---

Language / Currency