Net2Air site surveyor
 |
Aids positioning of Net2 nano control units |
|
Illuminated LED's indicate signal strength |
|
Buy direct from Paxton Access |
About - Net2Air site surveyor is a two part tool consisting of a mains powered base unit and battery powered card. It is used to check for signal strength around a site to assist optimum placement of Net2 nano control units and the Net2Air USB bridge or Net2Air Ethernet bridge. It is independent of other Net2 hardware and can be used to confirm the suitability of the location before the Net2 nano control units are installed.
Installation - The Net2Air site surveyor base unit is plugged into the mains supply in the location where the Net2Air bridge or Net2Air Ethernet bridge will be located.
Operation - Once the base unit is plugged in then you simply roam the building with the Net2Air site surveyor card. Press the card\'s button at locations intended for Net2 nano control units. The row of LED\'s on the card will indicate whether successful communications can be established. Green LED\'s indicate a suitable location, red LED\'s will indicate if a location is not suitable.
Installation - The Net2Air site surveyor base unit is plugged into the mains supply in the location where the Net2Air bridge or Net2Air Ethernet bridge will be located.
Operation - Once the base unit is plugged in then you simply roam the building with the Net2Air site surveyor card. Press the card\'s button at locations intended for Net2 nano control units. The row of LED\'s on the card will indicate whether successful communications can be established. Green LED\'s indicate a suitable location, red LED\'s will indicate if a location is not suitable.
| Info | Sales code | Description | Retail price* |
|
690-200 | Net2Air site surveyor kit | €73.70 |
* Retail prices are subject to VAT and do not include the cost of installation
