USB/RS485 plug-in converter
 |
Aids fault finding and testing of Net2 control units |
|
Use a laptop to connect directly to the Net2 control unit |
|
Plugs directly into the RS485 terminals of a Net2 control unit |
|
No end of line resistors required |
|
Buy direct from Paxton Access |
About - This installer tool has been devised to make it possible to fault find/test or configure a Net2 control unit locally. There is no need for a wired dataline connection.
Installation - Pull off the screw terminal block from the network port on the control unit and replace it with this module. Connect the module to the USB port on the PC and run the Net2 software. No further configuration is required as the software will look for the USB device (Net2 V4.13 or above is required).
Installation - Pull off the screw terminal block from the network port on the control unit and replace it with this module. Connect the module to the USB port on the PC and run the Net2 software. No further configuration is required as the software will look for the USB device (Net2 V4.13 or above is required).
| Info | Sales code | Description | Retail price* |
|
455-294 | Net2 USB/RS485 plug-in converter | €53.60 |
* Retail prices are subject to VAT and do not include the cost of installation
